Instruction manual

I/O Panel and Connections VIDRE LCD Monitors
8 I/O Panel and Connections
8.1 Input connections
8.1.1 Layout of the rear I/O panel
At the rear side all inputs are located.
8.1.2 Layout of the rear I/O panel with HDSDI
At the rear side all inputs are located.
Optionally HDSDI inputs are located just over the video inputs.
To use the HDSDI inputs don't disconnect the DVI connector.
8.2 Connector Pin Assignment
8.2.1 D-Sub-15p VGA connector
The pin assignment of the VGA I/O follows the standard.
The table below list the pin out.
Pin No. Function Pin No. Function
1 Red video input 9 NC
2 Green video input 10 Ground
3 Blue video input 11 NC
4 NC 12 SDA
5 Ground 13 Horizontal sync
6 Red video ground 14 Vertical sync
7 Green video ground 15 SCL
8 Blue video ground
Operation Manual Page 36 of 44