Instruction manual

Remote Control Software VIDRE LCD Monitors
7.7 Network Configuration
7.7.1 Change IP address
Open the menu OSD by clicking the button.
User can modify the IP address.
If modified successfully, the system appears a message box telling the operation successful.
Then restart the device, enter the new IP address in IE address and the web software will be
opened.
7.7.2 Change manager IP for SNMP Management
Configure the “Manager IP” to be the local IP address of SNMP Server. The Server and the SDI
processor should be in the same network segment. And Trap common and Trap port are for
SNMP. Do not change them.
7.7.3 Items for SNMP
Check/Uncheck the box of each item to enable/disable the SNMP trap. If check the box of
“SNMP”, each item below can be check or uncheck individually, that is, each trap can be
enabled or disabled individually. Otherwise, if uncheck the box of “SNMP”, the system will
disable all trap items for SNMP management at the same time.
Operation Manual Page 34 of 44