Instruction manual

Remote Control Software VIDRE LCD Monitors
7.4 Alarm Settings
Open the menu OSD by clicking the button. An individual setup for alarms can be done in this
menu.
For easy operation three buttons with default functions:
Select All: Check all the boxes for detection settings of selected channels
Cancel: Cancel all the checks for detection settings of selected channels
Default: Restore Factory Setting
Setting individual values for THRESHOLD and DURATION allows a perfect control of your
incoming SDI signal.
The video and audio signal can report signal status and validity, with detection of: Video lose,
Video black, Video frozen, Audio overload and Audio in silence
Different icons will appear regarding to the detection.
7.4.1 Video Detection
Setting individual values for THRESHOLD and DURATION allows a perfect control of your
incoming SDI signal.
Loss of Signal
It prompts an alarm picture as soon as signal is lost. This detection takes effect only if the box
is checked.
Video Frozen (Still Frame)
It will prompt an alarm picture as soon as the regular pixels ratio of the image is lower the
threshold you have settled. This detection will take effect only if the box is checked. The
threshold and duration of detection can be configured. The threshold means the frozen pixel
percentage in one frame.
Video Black
It will prompt an alarm picture as soon as video level is lower the threshold. This detection will
take effect only if the box is checked. The duration of detection can be configured.
7.4.2 Audio Detection
Measure unit of digital audio is dBFS (dB Full Scale). 0 dBFS is the maximum audio level,
corresponding to +24 dBu of analog audio.
Setting individual values for THRESHOLD and DURATION allows a perfect control of your
Operation Manual Page 30 of 44