Instruction manual

Remote Control Software VIDRE LCD Monitors
7.3 OSD parameters
Open the menu OSD by clicking the button.
Here you can adjust various parameters for On-screen Display, such as UMD, Audio meters and
so on.
7.3.1 Audio Meter Display
Audio meter monitoring
System provides four groups of audio meters to monitoring up to eight audio channels from
3G/HD/SD-SDI signal. Each group can show two audio channels and be configured individually.
The drop-down list is shown as following:
Off/ CH1&2/ CH3&4/ CH5&6/ CH7&8
„Off“ option means the selected audio meters are turned off and not displayed on screen.
The position of audio meters
Both Sides: AM1 and AM2 are located on the left side of screen, while AM3 and AM4
are located on the right side of screen. If there are only AM1 and AM2 (or AM3 and AM4)
displayed on the screen, so AM1 (AM3) is on the left side and AM2 (AM4) on the right side.
Left Side: AM1, AM2, AM3, and AM4 are all located on the left side of screen.
Right Side: AM1, AAM2, AAM3 and AM4 are all located on the right side of screen.
7.3.2 UMD
Upload UMD Text:
Type the characters in blank bar, change color of characters, and preview the UMD effect real
time. Click “Submit” after all parameters are settled and all characters will be displayed in
UMD.
Clear UMD Text:
Delete all characters or enter a “space”, and then click “Submit”, the character in UMD area will
be cleared.
Upload UMD picture:
UMD picture can be changed to user-defined one freely through this function. The picture that
you need to upload must be 32bits TGA format with Alpha channel. The size of picture is
720x60 pixels
Check/ uncheck UMD:
Operation Manual Page 27 of 44