Instruction manual

Remote Control Software VIDRE LCD Monitors
7 Remote Control Software
7.1 Attention before use
The SDI processor has a built-in Web server, so user could configure it by Internet Explorer
easily when connecting it through cable. The default IP address: 192.168.1.76. The default
user name: admin The default password: 000000 (six zeros)
7.1.1 Introduction of Web Control
You do not need to install the client software. Open any type of internet browser, e.g. Firefox
or IE, and input the IP address in the location bar to open the user interface. Default IP
address is “http://192.168.1.76”. Input user name (admin) and initial password (000000).
Click “login”, you will enter into the actual operation remote control.
7.1.2 Function overview
There are many labels at the top of the web page: Audio & Video, OSD, Alarm, Status, User,
Network, and Help. Different functions can be achieved under different labels.
Menu Description
Audio & Video: Configuration of input source, output resolution, display mode, color parameters, and HDMI
embedded audio.
OSD: Configuration of UMD display, Audio meters, AFD information display, Safe Marker, Waveform,
and Layout management.
Alarm: The system supplies detection of audio, mute, frame frozen, black, signal loss. Each alarm
threshold can set to meet your needs.
Status: Show the current status of video and audio.
Network: Configuration of IP address and parameters for SNMP management, and upgrade the firmware.
Help: Show the versions of each firmware here.
7.2 Audio & Video
Open the menu OSD by clicking the button.
Settings of the Audio and Video inputs.
Operation Manual Page 25 of 44