Instruction manual

Operation Menu VIDRE LCD Monitors
Item Function Operation Range
Hue Adjusts the level of the primary color or
mixtures of main colors which present in the
displayed image.
The function is not available for use when
the input source is VGA or DVI.
Use the keys [][] to
adjust the value
0 to 100
Saturation Adjusts the purity and intensity of colors in the
displayed image.
The function is not available for use when
the input source is VGA or DVI.
Use the keys [][] to
adjust the value
0 to 100
Use the keys [ENTER] to get into the setting, [][] to select a item, [][] to select a
source or adjust a value, [ENTER] to set the value, [EXIT] to quit.
5.2.5 Picture Advanced Setting
The picture advanced setting OSD displays the setup features for the monitor.
See function table below.
Item Function Operation Range
Picture Mode Selects a picture mode that best suits the type
of images shown on the screen.
Standard - for basic PC application
Movie - for viewing videos
Dynamics - for viewing landscape-specific
videos and playing games
Photo - for viewing still images
sRGB - for better color matching
representation with the peripheral devices,
such as printers, DSCs, etc.
Press the ENTER key to
select this option and
make change the settings
by using the keys []
[].
Standard
Movie
Dynamics
Photo
sR G B
Senseye Demo Displays the preview of screen images under
the selected mode from Picture Mode. The
screen will be divided into two windows; the
left window demonstrates images of Standard
mode, while the right window presents
the images under the specified mode.
Use the keys [][] to
adjust the value
On / Off
Overscan Slightly enlarges the input image. Use this
feature to hide annoying edge noise if present
around your image.
!!! The function is not available for use when
the input source is D-Sub or DVI-D. When the
input source is component, composite, or S-
video, the function is ON by default; however,
when the input source is HDMI, the default
setting is OFF !!!
Use the keys [][] to
adjust the value
On / Off
Use the keys [ENTER] to get into the setting, [][] to select a item, [][] to select a
source or adjust a value, [ENTER] to set the value, [EXIT] to quit.
5.2.6 PIP Setting
The PIP (picture in picture) setting OSD displays the setup features for the monitor.
Operation Manual Page 20 of 44