Instruction manual

Operation Menu VIDRE LCD Monitors
Item Function Operation Range
Phase Adjusts the pixel clock phase timing to
synchronize with the analog input video signal.
Not applicable to a digital input signal.
Use the keys [][] to
adjust the value
0 to 63
Use the keys [ENTER] to get into the setting, [][] to select a item, [][] to select a
source or adjust a value, [ENTER] to set the value, [EXIT] to quit.
5.2.4 Picture Setting
The Picture setting OSD displays the setup features for the monitor.
See function table below.
Item Function Operation Range
Brightness Adjusts the balance between light and dark
shades.
Press the ENTER key to
select this option and
make adjustments.
Contrast Adjusts the degree of difference between
darkness and lightness,
Use the keys [][] to
adjust the value
0 to 100
Sharpness Adjusts the clarity and visibility of the edges of
the subjects in the image
Use the keys [][] to
adjust the value
0 to 5
Color Use the [ENTER] key to
select this feature
Normal Allows video and still photographs to be viewed
with natural coloring. This is the factory default
color.
Use the keys [][] to
select this feature
Bluish Applies a cool tint to the image and is factory
pre-set to the PC industry standard white
color.
Use the keys [][] to
select this feature
Redish Applies a warm tint to the image and is factory
pre-set to the news print standard white color.
Use the keys [][] to
select this feature
User Mode Tailors the image color tint. The blend of the
Red, Green and Blue primary colors can be
altered to change the color tint of the image.
The default start setting is 50. Decreasing one
or more of the colors will reduce their
respective influence on the color tint of the
image. e.g. if you reduce the Blue level the
image will gradually take on a yellowish tint. If
you reduce Green, the image will become a
magenta tint.
Use the keys [][] to
select this feature and
select by [ENTER].
Use the keys [][] to
adjust the value
0 to 100
Reset Color Resets the User Mode
custom color settings to
the factory defaults.
Use the keys [][] to
select this feature
Yes / No
Dynamic Contrast The function will increase the level of contrast
to provide sharper and more detailed image
quality.
!!! Activating DynamicContrast will disable
Brightness and Contrast controls !!!
Use the keys [][] to
adjust the value and
select by [ENTER].
On / Off
Operation Manual Page 19 of 44