Instruction manual

Operation Menu VIDRE LCD Monitors
Menu Function Item Selection
Contrast
Sharpness
SYSTEM Input D-Sub / DVI (HDSDI)/
HDMI / Component /
Composite / S-Video
Display Mode Full / Aspect / 1:1
OSD Setting Language English / French /
German / Italian /
Spanish / Polish / Czech /
Hungarian / Serbo-Croatian
/ Romanian / Dutch /
Russian / Swedish /
Portuguese
H-Position
V-Position
Display Time
5 / 10 / 15 / 20 / 25 / 30
sec
OSD Lock On / Off
DDC/CI
On / Off
Information
Reset All
Yes / No
Use the keys [][] to select a major item, press the [ENTER] key to enter the Menu item or
[EXIT] to quit.
5.2.3 Display Setting
The display setting OSD displays the setup features for the monitor.
See function table below.
Item Function Operation Range
Auto Adjustment Optimizes and adjusts the screen settings
automatically for you.
The AUTO key is a ‘hot-key’ for this function.
When you connect a digital video output using
a digital (DVI) cable to your monitor, the AUTO
key and the Auto Adjustment function will be
disabled.
Press the ENTER key to
select this option and
make adjustments.
H-Position Adjusts the horizontal position of the screen
image
Use the keys [][] to
adjust the value
0 to 100
V-Position Adjusts the vertical position of the screen
image
Use the keys [][] to
adjust the value
0 to 100
Pixel Clock Adjusts the pixel clock frequency timing to
synchronize with the analog input video signal.
Not applicable to a digital input signal.
Use the keys [][] to
adjust the value
0 to 100
Operation Manual Page 18 of 44