Instruction manual

General Description VIDRE LCD Monitors
• Configurable ambient light sensor
• VGA/DVI input support Video sync - 1080p
• OSD menu controls by Remote controller, OSD button and RS232C controller
The Display operation Mode is transmissive at normally black. The surface treatment has an
Anti-Glare coating (Haze 25%) and Hard coating (3H)
2.1.3 Application
Main applications for the VIDRE LCD monitors are
• Video Production Applications
• Public Display Application
• Home Theater Application
• MFM Application
• MultiViewer Application
• Signal Control Monitor
2.2 Model VT24HDView
2.2.1 Product Description
Based on VIDRE V-sereies, VT24HDview is a high-quality monitor equipped with an 3G/HD/SD-
SDI input and signal processor to display digital video and audio signals.
VT24HDview can be controlled by Ethernet network via IE browser, which is convenient to
configure the display parameters. The device provides audio and video detection, such as
signal loss, signal freeze, audio silence and so on.
The text of UMD program can be edited freely. And it supports SNMP, which is easy to manage
the device. Although the signal processor adopts DVI output interface, the HDMI signal can be
obtained by using a DVI to HDMI adapter or cable. In HDMI mode, the HD/SD audio are
embedded into HDMI signal.
2.2.2 Features
Basic features of the SDI signal processor are:
• Automatic input detection of 525i60, 625i50, 720p, 1080i and 1080p format of SDI signal
• Various output resolutions up to 1920x1080px60
• In HDMI mode, the HD/SD audio are embedded into HDMI signal
• Audio and video monitoring and alarm, such as signal loss, signal freeze, audio silence
• Display program UMD and 8 channels audio, and adjust transparency of them freely
• Various waveforms, such as illumination waveform, PbPr waveform, audio waveform, etc
• Build-in web server to control the device with user-friendly interface
• Adjust luminance, saturation, contrast and de-noise freely
• Provide on-screen display: input formats, AFD and safe marker
• Supports SNMP
2.2.3 Network Port
The signal processor is equipped with a RJ45 interface with 10/100/1000M auto-detection.
The default IP address is 192.168.1.76.
The built-in web server operates as remote control interface.
Operation Manual Page 10 of 44