User manual

4CH STANDALONE DVR
8、RECORD CONTROL
(1)Press " " key to start recording.
Icon " " indicates recording.
(2) During recording, the mark ” * ” appears in status of overwriting
9、NTSC / PAL SYSTEM SETUP
(1) Replace the jumper to change system.
(2) J1 as follows:
PAL
NTSC
J1
(1)EVENT :
Press choose one period, then press to play.
(2)DATE / TIME :
The signal ”>” goes up to the “HARD DRIVER: MASTER”. Press
to select items. Use select to change data, Then press to play.
(3)PLAYBACK :
*Press to speed forward. Continue to press and show
x2、x4、x8 multiple playing.
*Press to show x2 multiple back motion.
*Press to pause.
*Press to stop.
-12-
Strike the button "pause" five times continually, "L" pops up on the left, to enable .
Keypad lock-up feature.
Strike the button "pause" five times again, "L" not found, to unlock keypad.
10.Keypad Lock-up Setup: