User`s manual

Select one of the date mode, and confirm by pressing “Enter”.
Example) dd/mm/yy ---- Day/Month/Year
1.5Time Indication Position Setting (OSD format)
After selecting this item, the screen prompt is as follows:
One of the eight modes of time indication position should be highlighted and confirmed by pressing
“Enter”. The meaning of the eight modes is elaborated in the following example:
Example: TTBB(W) – Channel One (Top), Channel Two (Top), Channel 3 (Bottom), Channel 4
(Bottom) and Display Color (White)
1.6Default Value Setting(setup)
This menu item is to return all settings on this unit to ex-factory default setting. If this command is
executed, all previously configured settings will be lost and reverted to ex-factory default.
To confirm on the reverting to default settings, “Enter” key should be pressed. To maintain the present
settings without reverting to default settings, “Exit” key should be pressed.
1.7SW Update
Via USB port can update the Firmware. To press “Enter” key to Update firmware.
〔OSD〕
TTTT(W) TTTT(B)
BBBB(W) BBBB(B)
TTBB(W) TTBB(B)
BBTT(W) BBTT(B)
OFF
WARNING ：
Restore to factory default！！
Are you sure？
〔ENTER〕-> YES〔EXIT〕-> NO
WARNING ：
SW Update will be start!!
Make sure SW is in USB memory
Do not Power Off during SW update
〔ENTER〕-> YES〔EXIT〕-> NO
15