Technical information

Manual Voice Server Espero © Vidicode 2009
58
• Press CHANGE
CHANGECHANGE
CHANGE to enable TelNet.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
5.23 Service timer
The Service timer determines the performance of the network
connection. Default the Service timer is set to Automatic. Changing the
setting should only be done when advised by a service engineer to solve
problems.
• Press CHANGE
CHANGECHANGE
CHANGE to change the Service timer.
The following settings are available:
S1-S5, F1-F3 and U1-U3. Where S stands for Slow, F for Fast and U for
Ultra fast.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
5.24 Monitor active
The monitor function allows you to listen to the conversations that take
place. This requires the RTR Call Monitor software, which connects with
the Voice Server over the network. With the Monitor function “On” the
telephone numbers of both local and remote caller are displayed.
Monitor active: No
CHANGE STOP
Server timer: Auto
NEXT CHANGE STOP
TelNet active: Yes
NEXT CHANGE STOP
TelNet active: No
NEXT CHANGE STOP