Technical information

Manual Voice Server Espero © Vidicode 2009
56
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
5.19 GMT correction
GMT correction
GMT correctionGMT correction
GMT correction property is used to identify the time zone. NTP server
normally issues GMT (also know as UTC). GMT correction can be set in
half hours from -15:00 to + 15:00.
• Press CHANGE
CHANGECHANGE
CHANGE to set GMT correction. Keep pressing CHANGE
CHANGECHANGE
CHANGE to
increase the correction. It will start with + 1:00, keep pressing
CHANGE
CHANGECHANGE
CHANGE to increase. After + 15:00 – 15:00 will appear.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
GMT correction refers to winter time. Summer time and winter time are
corrected automatically.
5.20 UDP address
User Datagram Protocol (UDP) is of importance only if data input type
'network' is used. This means that a caller types in some information
using DTMF. This data is sent as an UDP message over the network to a
dedicated computer which runs a special application that can interpret
the data. The computer must then send back an OK or Error, also using
an UDP message. For more information on this please contact your
dealer.
• Press CHANGE
CHANGECHANGE
CHANGE to enter the UDP address.
UDP addr: 0.0.0.0.
NEXT CHANGE STOP
GMT correction: 00:00
NEXT - CHANGE + STOP