Technical information

Manual Voice Server Espero © Vidicode 2009
55
5.17 NTP server
If there is a possibility on your network to give the Voice Server access to
a NTP (Network Time Protocol) server, it is recommended you enable it
because it will give the recorder an accurate time reference.
• Press CHANGE
CHANGECHANGE
CHANGE to enter the NTP server.
Use the numerical keys to enter the NTP server.
• Press STORE
STORESTORE
STORE to save the NTP server.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
5.18 NTP port
NTP port is the port number through which the recorder as a client can
connect to the NTP server. The NTP port is default set to 123. Consult the
network manager for the port number.
• Press CHANGE
CHANGECHANGE
CHANGE to change the NTP server port number.
Use the numerical keys to enter the NTP port number.
• Press STORE
STORESTORE
STORE to save the FTP server port number.
NTP port: »
CANCEL
NTP port: 123
NEXT CHANGE STOP
NTP serv: »00.000.000.000
STORE CANCEL
NTP serv: 0.0.0.0
NEXT CHANGE STOP