Technical information

Manual Voice Server Espero © Vidicode 2009
49
5.6 DHCP server
In case a DHCP server is used on the network the DHCP server option
must be enabled. In case a DHCP server is not used on the network it
must be disabled.
• Press CHANGE
CHANGECHANGE
CHANGE to enable DHCP server.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
When a DHCP server is used, the IP and Gateway addresses are
automatically assigned. Without DHCP server you must manually enter
these IP addresses.
5.7 IP address
As part of the network the Voice Server needs an IP address. When a
DHCP server is used (see previous item) the DHCP server will assign an IP
address. When a DHCP server is not used a static IP address must be
assigned to the Voice Server.
• Press CHANGE
CHANGECHANGE
CHANGE to enter the IP address
Use the numerical keys to enter the IP address.
• Press STORE
STORESTORE
STORE to save the IP address.
IP addr: »00.000.000.000
STORE CANCEL
IP addr: 0.0.0.0
NEXT CHANGE STOP
DHCP server: Yes
NEXT CHANGE STOP
DHCP server: No
NEXT CHANGE STOP