Technical information

Manual Voice Server Espero © Vidicode 2009
36
• Press CHANGE
CHANGECHANGE
CHANGE to select OFF
OFFOFF
OFF, Black
BlackBlack
Black or White
WhiteWhite
White.
Default the Number list is set to WHITE.
WHITE. WHITE.
WHITE. The white list is empty.
Therefore on a new Espero, even with recording channels installed,
nothing will be recorded. The white list must be disabled or numbers
must be added.
4.13 Number filter
The number filter is used to hide or replace extension numbers on
outgoing calls. The reason to do this is that the PBX has to disclose the
internal number to the Voice Server for various procedures.
Depending on the setting the number can be hidden altogether or
replaced by the general number.
• Press CHANGE
CHANGECHANGE
CHANGE to change the Number filter method. Select one of
the following options: Remove; Hide; Replace; Off
When "Remove" is selected the entire number is removed from the
outgoing protocol communication, your service provider will fill in the
number with the general number.
When “Hide" is selected the number is removed and the number is
marked as restricted, the called party is not able to see your number.
When "Replace" is selected the number is replaced by a replacement
number that can be entered afterwards in the next menu item Please
note most service providers don’t allow replacement and will correct the
replacement with the general number.
When "Off" is selected there is no number filtering active.
Numberfilter: Off
NEXT CHANGE BACK
Numberlist: Black
NEXT CHANGE STOP
Numberlist: White
NEXT CHANGE STOP