Technical information

Manual Voice Server Espero © Vidicode 2009
111
Entering the date or code to search for you can use the  key as
wildcard. For example enter :05:05 to search for all recordings from
May 2005. The
and are used to move the cursor left or right. It
is also possible to refine the search according to remote telephone
number or line number. In that case continue to read on § 18.4.1.
• Press SEARCH
SEARCHSEARCH
SEARCH to search for recordings by the entered date.
The display will show:
For the entered date 14-07-05 there were 24 recordings found. The first
of the 24 recordings is selected for playback, the date and time of the
call is displayed to the left. Use the and keys to move the
selected recording one up or down.
• Press the key to start playback of the selected recording.
The display will show:
The display shows the remote number between parenthesis. Next to that
is the duration of the call, the arrow indicating incoming or outgoing
call. Below that is the date and time of the call, the line number and the
current playback position.
During playback the recorder keys have the usual recorder functions.
The and recorder keys are used to move the playback position
60 seconds backward or forward. The key is used to stop playback.
The next section describes how to refine your search to look for a
specific number.
18.4.1 Search according to local number
Open the search menu as described in § 18.4. Remember that the
entered date will always be incorporated in the search.
The display will show:
(remote number) <- 00:01:14
14-07-05 18:46 02 00:00:01
14-07-05 12:11 1/24
SEARCH INFO STOP