Technical information

Fax Server Uno Manual ©Vidicode 2008
31
4.20 NTP server port
NTP server port is the port number through which the Fax Server connects to
the Network Time Server. The NTP server port is default set to 123, as is the
setting of the port number in most NTP servers. If there is no direct reason to
change the NTP server port it is best left unchanged.
• Press CHANGE
CHANGECHANGE
CHANGE to change the NTP server port number.
Use the numerical keys to enter the NTP server port number.
• Press STORE
STORESTORE
STORE to save the NTP server port number.
• Press NEXT
NEXTNEXT
NEXT to move on to the next menu item.
4.21 GMT correction
GMT correction
GMT correctionGMT correction
GMT correction property is used to identify the time zone. NTP server normally
issues GMT. GMT correction can be set in half hours from -15:00 to + 15:00.
• Press CHANGE
CHANGECHANGE
CHANGE to set GMT correction. Keep pressing CHANGE
CHANGECHANGE
CHANGE to increase
the correction. It will start with + 1:00, keep pressing CHANGE
CHANGECHANGE
CHANGE to increase.
After + 15:00 there will appear - 15:00.
• Press NEXT
NEXTNEXT
NEXT to save and move on to the next menu item.
GMT correction refers to Winter time. Summer time and Winter time are
corrected automatically.
4.22 TelNet
TelNet can be used to log on to the Fax Server and configure the Fax Server
from your PC. If required contact your supplier for more details.
GMT correction: 00:00
NEXT CHANGE STOP
NTP server port: »
STORE CANCEL
NTP server port: 123
NEXT CHANGE STOP