Technical information

Fax Server IP Manual
26
TelNet active: Yes
NEXT CHANGE STOP
TelNet enabled.
• Press NEXT to save and move on to the next menu item.
2.7.10 DHCP server
In case a DHCP server is used on the network the DHCP server must be
enabled. In case a DHCP server is not used on the network the DHCP
server must be disabled.
Use DHCP server: No
NEXT CHANGE STOP
Enable DHCP server.
• Press CHANGE to enable DHCP server.
Use DHCP server: Yes
NEXT CHANGE STOP
DHCP server enabled.
• Press NEXT to save and move on to the next menu item.
2.7.11 IP address
As part of the network the Fax Server needs an IP address. In case a DHCP
server is used (see previous item) the DHCP server will assign the Fax
Server an IP address. In case a DHCP server is not used a static IP address
must be given to the Fax Server.
IP addr: 0:0:0:0
NEXT CHANGE STOP
Set the IP address of the Fax server.
• Press CHANGE to enter the IP address of the Fax server.
IP addr: ▓00:000:000:000
STORE CANCEL
Enter the IP address of the Fax server.