Call Recorder Pico - User Manual
Call Recorder Pico Manual UK © 2009 Vidicode
39
If this occurs, it may be a hardware problem. The Pico probably does not
detect the telephone is on or off hook, because the line voltage
detection level is too low. The line voltage detection level can be
increased by removing the jumper from within the Pico.
This is what you should do:
Disconnect the Pico from the Telephone (line) and from
the PC.
You’ll need a pair of tweezers (preferable plastic).
After that, follow the instructions below.
1
11
1
-
--
- Carefully open the Pico by disconnecting the blue and the gray parts,
this should be easy.