Call Recorder Pico - User Manual

ManualsBrandsVidicode ManualsDigital Call RecordersUSB Analogue Call Recorder Pico

Device is connected

Device is connectedDevice is connected

Device is connected to the

to the to the

to the:

: :

• Select either the telephone Line or to the telephone Handset

according to the way the Pico is connected.

Enable recording by this device

Enable recording by this deviceEnable recording by this device

Enable recording by this device

If you want the Pico to record, this checkbox should be checked (it is by

default). At some point however, it could be necessary to disconnect one

or more Pico’s. Use this checkbox to disable recording from the device,

without having to physically disconnect it.

• Check the “Enable recording by this device” checkbox

Once the device is enabled, other options can be set.

3.2.2 Start / Stop

Start / Stop a recording

Start / Stop a recordingStart / Stop a recording

Start / Stop a recording

There are four possibilities:

Automatic: The software automatically starts recording when it

detects that the telephone is off-hook, based on the audio level

and on / off hook signals when available. It is necessary to adjust

all settings in this dialogue.

Semi-automatic: The software detects when the telephone is off-

hook or on-hook, but it does not start a recording automatically.

You can choose to start a recording when the telephone is off-

hook, by clicking the Record button in the Pico application or

press the Record button on the Pico itself. Only adjust the Pre-

recording period in this dialogue

Manual: You choose to start and stop a recording manually.

Recording can be started and stopped from the Audio screen.

Recording can also be started from the Active dialog or by using

the Record button on the Pico itself. Only adjust the Pre-

recording period in this dialogue.

Automatic (on / off hook only) The software automatically starts

recording when it detects that the telephone is off-hook, based

on on-hook signals only, not on audio level. This option is not

possible when the Pico is connected to the handset (digital

telephone).

About Voice

About VoiceAbout Voice

About Voice activated

activated activated

activated recording

recording recording

recording

Voice activated recording is used when recording from the Handset. This

option is used when recording from a digital telephone.

The principle of voice activated recording is quite simple. The Pico

software constantly monitors the connected devices for their audio level.