Call Recorder Pico - User Manual

Call Recorder Pico Manual UK © 2009 Vidicode
14
3 Options
3.1 Language
The Pico software is translated into a number of languages. It is possible
to change the display language at any time.
• Select your language and click.
3.2 Device settings
Following the description in the previous paragraph, start the software
and open from the Options
OptionsOptions
Options menu the Device
DeviceDevice
Devices
ss
s screen.
To the left you will see a list in a drop box of the available audio devices.
All connected Pico’s should show up in the list.
Make the device settings for all Call Recorders separately.
Select one of the audio devices, and then change its settings.
Icon
IconIcon
Icon
By default, the Serial number is used as the device name. An enabled
Pico shows up as a button in the List tab.
3.2.1 Basic
Device
DeviceDevice
Device name
name name
name
Each Pico is identified by its serial number. For the individual user it is
easier to address a name to the Pico to identify it. The name is referred
to as the ‘Device name'.
• Enter a name for the device in the ‘Device name’ field.
Input channel
Input channelInput channel
Input channel
The Call Recorder Pico can record from a telephone or a microphone. To
record from a microphone, connect it to the Pico.
• Select ‘microphone’ as Input Channel.
It is not possible to record from a telephone and a microphone at the
same time.