User guide

Roxio Creator User Guide
www.roxio.com
64
Recording from an audio input device
Easy Audio Capture is an assistant you can use to quickly record audio from
Internet radio and other sources, using a connection from your audio
equipment to your computer’s sound input.
To open Easy Audio Capture:
■
From Creator’s main application window, select the Music-Audio task
category and choose Capture Audio from Sound Card.
You can use Easy Audio Capture in two modes: Full mode and Mini mode.
To switch between modes, use the Switch to Mini Mode and Switch to Full
Mode buttons:
Using Easy Audio Capture in Full mode
To record audio in Full mode:
1 Set the following options, as required:
■
Capture From: Select your sound card from the list.
■
Input (Windows XP only): Select your audio input channel. For
example, if you want to record from a Line in input, select Line
In.
Note Some sound card drivers do not support the “Stereo Mix”
or “Wave Mix Out” Input option (the name of this option varies
depending on the sound card). This option captures analog audio
(such as Internet radio). If you need it, check to see if an updated
device driver is available for your sound card.
■
Recording Level: Drag the slider to increase or decrease the
recording volume. If the volume is too high, distortion may
Switch to Mini Mode
Switch to Full Mode