Setup guide

7
Tab 6, 14 Tab 8,16Tab 7, 15English Tab 5, 13Tab4, 12Tab 3, 11Tab 2, 10
WELCOME
Thank you
Thank you for purchasing the Bose
®
VideoWave
®
entertainment system. This guide provides you with
step-by-step instructions for setting up your new
entertainment system.
Note: Professional installation is recommended.
Product overview
The VideoWave system features a monitor and stand,
and comes with a control console, a remote control,
and a dock compatible with iPod and iPhone. The
control console connects to the monitor using a single
cable. Each of your A/V devices connects to the back
of the control console.
The setup process
Your VideoWave entertainment system is packed in two
boxes. The large rectangular box contains the monitor.
The smaller box contains the control console, monitor
stand, screws, and system parts. Inside are two boxes
labeled and . These boxes contain the system
parts that are used in different stages of the setup
process.
Carefully unpack each item as you proceed through the
setup. If an item is damaged, do not attempt to use it.
Notify Bose or your authorized Bose dealer
immediately. For Bose contact information, see the
address sheet included in the monitor stand box.
There are two parts to the setup process:
• Physical setup – This part of the setup includes
placing the monitor and control console and making
system connections. The items used in this stage are
the monitor, the stand, the parts located in Box ,
and the control console.
• Interactive setup – This part begins when you turn
on the system and start following the on-screen
instructions provided by the Unify
®
intelligent
integration system. This proprietary technology will
help you complete the setup, showing you the right
inputs and best connection options, and will even
verify that you've done it correctly. The items used for
this stage are located in Box .
Monitor
Control
console
Dock for iPod
and iPhone
Bose click pad
remote control
Stand
1
1
2
1
1
2
00.Marley_Setup.book Page 7 Tuesday, January 10, 2012 8:47 AM