Setup guide

INTERACTIVE SETUP

EnglishTab 6, 14Tab 8, 16 Tab 7, 15 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab 2, 10

1. Press the power button ( ) on the control console.

The power light on the control console indicates

the startup status.

Note: When the system starts up, you will hear a start-up

tone, and on the monitor screen you will see the Bose

logo with a progress bar under it.

2. Slide the battery compartment cover off the back

of the remote control.

3. Install the two AAA (IEC LR3) batteries (included),

matching the polarity markings (+ and –) to the

markings inside the battery compartment.

4. Slide the battery cover back into place.

Status Meaning

Red Off

Blinking green Starting up

Steady green On and ready to use

Orange Off and charging iPod or iPhone

Blinking yellow for 30

seconds after shutting

system down

Unify

system setup was started, but is

incomplete

Slow blinking red while

system is off

Unify system setup is complete, but no

sources are present

Red blinking off every 5

seconds

Remote control batteries are low

Power light

Battery compartment

cover

AAA (IEC LR3)

batteries (2)

00.Marley_Setup.book Page 18 Tuesday, January 10, 2012 8:47 AM