Setup guide

15
PHYSICAL SETUP
Tab 6, 14 Tab 8,16Tab 7, 15English Tab 5, 13Tab4, 12Tab 3, 11Tab 2, 10
Control console placement
and connections
Here is what you need from Box 1:
You also need the control console:
1. Place the control console on a flat, stable
surface near the monitor.
• Make sure the supplied monitor cable (3 m) can
reach from the console to the monitor.
• Until your system setup is complete and your
external devices are connected, it is helpful to
keep the control console positioned for easy
access to its rear connection panel.
CAUTION: If using the monitor on the stand, DO NOT
place the control console between the legs of the stand
or anywhere directly under the bottom edge of the
monitor. This will avoid blocking ventilation and audio
system openings in the product enclosure.
1
1
Power supply
Power supply
AC power cord
Control console
Control
console
Monitor
00.Marley_Setup.book Page 15 Tuesday, January 10, 2012 8:47 AM