User guide

Talk Time Based Call Charging
This method is used when the carrier trunk is not providing pulses or cost data to the phone system.
Using menu 9- Telephone Number Charges enter the prefix telephone numbers that distinguish
the various calls, such as local calls, STD, IDD, mobile etc, and enter the appropriate call rate for the
peak period (default) and or flat cost connection or flag fall cost).
These call charges exclude tax, and represent the raw values before the markup (menu 5) is applied.
The table can be easy to setup if you simply want to have a connection fee (“Flat” column) and a call
rate per minute under the “Off Peak” Column, in order to add a cost based on the call talk time in
minutes.
E.g. To charge for a call to all outgoing mobile number which starts with the digits “04” simply do the
following:
a) Select ‘Add’ to enter a new table row.
b) Enter the first couple of digits which designate the call type to be cost, e.g. 0011
c) Enter the Description as Overseas
d) Select the Call Type as International
e) Enter in the 0.25 connection fee in the Flat column
f) Enter the 1.00 call charge per minute under the Peak column.