Instruction manual

AUDIO BEEP SETTING
For this setting there are 4 levels that enable/disable the audio beep response to touch and remote uses.
The factory default setting is 2.
1. Ensure TV is in standby. Press the YELLOW button on the MASTER remote.
2. Scroll up or down with the arrow keys and save the changes with the OK button.
3. All the LED’s go off and after 2 seconds the standby LED’s go on (all red).
LED’s FLASH SETTING
For this setting there are 4 levels that enable/disable the LED’s flash response to touch and remote uses.
The factory default setting is 4.
1. Ensure TV is in standby. Press the BLUE button on the MASTER remote.
2. Scroll up or down with the arrow keys and save the changes with the OK button.
3. All the LED’s go off and after 2 seconds the standby LED’s go on (all red).
1 2 3 4
Level 1 2 3 4
Action Beep Off Only with the remote Only with the touch Touch and remote
1 2 3 4
12
TOUCH CONTROL SETTINGS
Level 1 2 3 4
Action Flash Off Only with the remote Only with the touch Touch and remote
CLEANING MODE
The touch control can be temporarily disabled to allow for the glass to be cleaned without activating the TV.
1. Ensure TV is in standby. Press the BLUE button on the WATERPROOF remote.
2. The LED’s will flash red and purple for 30 seconds while the touch control is disabled. Normal operation
will resume automatically.