Specifications

Global Setup Menu Functions
VTM-2000 Installation and Operation Handbook
4-21
7. Press the SETUP/ENTER button to select UNLOCK and press the SETUP/ENTER
again button to unlock the front panel. Press EXIT at any time to keep the front
panel locked.
To change the password:
NOTE: The default password is 0-0-0.
1. Press the SETUP button to display the SETUP menu.
2. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to move
the cursor to the COMMUNICATION SETUP menu.
3. Press the SETUP/ENTER button.
4. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to move
the cursor to CHANGE PASSWORD.
5. Press the SETUP/ENTER button. The Enter Password screen appears.
6. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to select
0-9 (first digit in the current password).
7. Use the SETUP/ENTER button to move the cursor to the second password number.
8. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to select
0-9 (second digit in the current password).
9. Use the SETUP/ENTER button to select the third password number.
10. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to move
the cursor to select 0-9 (third digit in the current password). When the correct
password is entered, LOCKED changes to UNLOCK.
11. Use the SETUP/ENTER button to move the cursor to UNLOCK.
12. Press the SETUP/ENTER button. The Enter New Password screen appears. It is
time to ENTER A NEW PASSWORD.
13. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to select
0-9 (first digit in the new password).
14. Use the SETUP/ENTER button to move the cursor to the second password number.
15. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to select
0-9 (second digit in the new password).
16. Use the SETUP/ENTER button to move the cursor to the third password number.
17. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to select
0-9 (third digit in the new password).
18. Use the SETUP/ENTER button to move the cursor to select ACCEPT.
19. Press the SETUP/ENTER button. The new password has been set.
Set Time
When selecting Set Time, the Enter New Time Screen, shown in Figure 4-3, appears.
The Enter New Time screen is used to set the internal clock of the unit. Press the UP
and DOWN buttons (or rotate the UP/DOWN NAVIGATION knob) to change the