Specifications

Global Setup Menu Functions
VTM-2000 Installation and Operation Handbook
4-20
2. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to move
the cursor to the SYSTEM menu.
3. Press the SETUP/ENTER button.
4. Use the UP or DOWN buttons (or the UP/DOWN NAVIGATION knob) to move
the cursor to PANEL LOCKOUT.
5. Press the SETUP/ENTER button. The Enter Password screen appears.
6. Use the UP and DOWN NAVIGATION buttons to select 0-9 (first digit in
password).
7. Use the SETUP/ENTER button to move the cursor to select the second password
number.
8. Use the UP and DOWN NAVIGATION buttons to select 0-9 (second digit in
password).
9. Use the SETUP/ENTER button to move the cursor to the third password number.
10. Use the UP and DOWN NAVIGATION buttons to select 0-9 (third digit in
password). When the password is correctly entered, LOCKED will change to
UNLOCK.
11. Press the SETUP/ENTER button to move the cursor to select UNLOCK.
12. Press the SETUP/ENTER button.
13. Use the UP and DOWN NAVIGATION buttons to move the cursor to select the
Preset Number or front panel.
14. Press the SETUP/ENTER button to toggle between Lock and Unlock on the
highlighted Preset Number selection or front panel.
15. Repeat the previous two steps for any other selection needed to be made.
16. After the settings are complete, press the EXIT button to exit the menu.
(If the front panel was locked in the steps above) The front panel is locked once EXIT
is pressed. Any button pressed besides the SETUP/ENTER button will invoke the
PANEL LOCKED OUT message. Subsequent presses of the SETUP/ENTER button
will invoke the ENTER PASSWORD setup screen. The panel will be unlocked and
the Setup menu can only be accessed after a valid password has been entered.
To unlock the locked front panel or preset:
NOTE: The default password is 0-0-0.
1. Press the SETUP/ENTER button until the Enter Password Screen appears.
2. Use the UP or DOWN buttons to select 0-9 (first digit in password).
3. Use the SETUP/ENTER button to move the cursor to the second password number.
4. Use the UP or DOWN buttons to select 0-9 (second digit in password).
5. Use the SETUP/ENTER button to move the cursor to the third password number.
6. Use the UP or DOWN buttons to select 0-9 (third digit in password). When the
password is correctly entered, LOCKED will change to UNLOCK.