Specifications

General Operation
VTM-2000 Installation and Operation Handbook
3-29
Figure 3-26. Two Bar Graph Display with Lissajous Diagram
Table 3-15. Description of Two Bar Graph Display with Lissajous Diagram
Field
Identifier
Field information
Nomenclature
1
Input Displays the video input associated with the audio.
2
Audio Type Displayed as Analog, AES/EBU, or Embedded
3
Audio Input Monitored Audio channels that are associated with the
meters. Shown as 1 to 16 (analog is 1 to 4, AES is 1 to 8,
and Embedded is 1 to 16).
4
Meter Response Displays the selected meter response: VU, Peak, True Peak,
VU + Peak, VU + True Peak.
5
Scale Selection Displays the selected meter scale: Type I, Type IIa, Type IIb,
Type I + 8, Nordic, DIN 45406, dBFS, or Zero REF dBFS
(scales are dependent upon audio type).
6
Lissajous Display Lissajous of bar graph 1 with labels for R, L, and the number
of the meter being monitored (i.e. M-1)
7
Phase Bar Phase Meter of bar graph 1
8
Audio Graticule (with
meter labels)
Shown as Stereo Pairs (L1, R1)
9
Zoom
 Zoom (when enabled)
 Blank when disabled
10
Peak Program and
Reference Level Markers
Shows the peak and reference levels for the signal. This can
be adjusted in the AUDIO SETUP\METER SETUP\REF
LEVEL DIGITAL (or ANALOG) menu and Peak Program
Level and Analog menus.