Specifications

General Operation
VTM Series Installation and Operation Handbook
3-50
Figure 3-39. Alarm Log Diagram
Table 3-29. Description of Alarm Log Display Diagram
Field
Identifier
Field information
Nomenclature
1
Input Displays the user-configurable source IDs for the input and
routers.
2
Display Label Displayed as ALARM LOG
3
Page Information Displayed as PAGE X of Y, where X is the selected page and
Y is the total number of pages.
4
Paging information Displays ◄ = FIRST page.
5
Paging information Displays ► = LAST page.
6
Paging information Displays ▲ = PAGE UP.
7
Paging information Displays ▼ = PAGE DOWN.
8
Column Labels Displays the labels # (for the number in the alarm list),
ALARM NAME, DATE, TIME, LENGTH (Duration), and
PEAK VALUE*.
9
Alarm List Displays the list of alarms from the most recent alarm to the
last recorded alarm. There is a maximum of 200 alarms that
can be logged.
*NOTE: Certain alarm parameters do not have a level measurement that can report a peak value. This
is indicated when NO RPV (No Report Peak Value) appears in the PEAK VALUE column. If A3-OPT2
is installed, all audio alarms will report NO RPV.
When an alarm is first registered, it appears on the alarm display and is highlighted in
yellow. If the alarm is short term (i.e., two seconds or less), the alarm text is not
highlighted after approximately two seconds. If the alarm continues longer than two