Specifications

General Operation
VTM Series Installation and Operation Handbook
3-43
Figure 3-36. Picture Display Diagram
Table 3-23. Description of Picture Display Diagram
Field
Identifier
Field information
Nomenclature
1
Input Displays the user-configurable source IDs for the input and
routers.
2
Standard Displays the Line Rate/Frame Rate [1080i/59.94]. Select the
Standard in the VIDEO FORMAT\VIDEO A thru D
CONFIGURE menu.
3
Closed Caption Shown as CC1 – CC4, T1 – T4, or 708. Closed Caption
selections are located in the PICTURE SETUP\CLOSED
CAPTION DISPLAY menu.
4
Gamut Indication Status Displayed when Gamut is enabled. This field is not displayed
when Gamut for the input is disabled. Select GAMUT in the
PICT pane menu to enable GAMUT.
5
Aspect Ratio Displays the aspect ratio. The aspect ratio is determined by
the input format.
6
Picture Displays the picture of the selected video input.
7
XDS Displays the location of the XDS information.
8
TIMECODE Displays the location of the timecode information.
The picture display changes according to the aspect ratio and anamorphic selections in
the global setup menu. A picture display diagram, shown as the left drawing in
Figure 3-37, shows the 4:3 display with a 16:9 source. Also, the picture to the right in
Figure 3-37 shows a 4:3 display with a 4:3 source.