Specifications

General Operation
VTM Series Installation and Operation Handbook
3-28
Table 3-15. Description of Vector Display Diagram (continued)
Field
Identifier
Field information
Nomenclature
5
Gain Displays the gain where Gain is 1.00, 2.50, 5.00, or 15.00.
This is changed by pressing the STEP or VAR button.
6
Phase cursor readout Displays the Phase cursor as PHASE and the number in
degrees.
7
Line select information Line select is shown as Line and the number with the ODD or
EVEN field (odd or even field will only show for certain Video
Formats).
8
Vector Standard Displayed as 75%, 100%, or 75% + 100% (HD only). This is
selected in the Vector Pane setup submenu called Analog
standard, SD standard, or HD standard.
9
Zoom
 Zoom (when enabled)
 Blank when disabled
 Press the ZOOM button to cycle through the Zoom
modes.
10
Vector graticule Shows the Vector graticule.
Graticules are configured by selecting the Video Input Format along with the
appropriate Vector Setup standard.
Some graticule scales are illustrated in Figure 3-21 to Figure 3-28.
Figure 3-21. Vector NTSC Graticule