Specifications

General Operation
VTM Series Installation and Operation Handbook
3-13
Waveform Front Panel Selections
The following buttons directly affect the waveform display.
Moving the Waveform using the Setup Knobs
Move the Waveform display relative to the graticule by using the LEFT and RIGHT
arrow Knob (for horizontal movement) and the UP and DOWN arrow knob (for
vertical movement), as shown in Figure 3-10. Press the LEFT/RIGHT (horizontal
direction) or UP/DOWN (vertical direction) arrow knob to center the waveform in the
particular direction. Centering the waveform can also be performed by using the
Waveform pane menu (by pressing and holding the WFM button).
Figure 3-10. Moving the Waveform
Sweep Buttons
The Sweep buttons are used to determine the sweep rate scale. The scale is displayed in
the upper-right area of the waveform pane, as shown in Figure 3-11.