Specifications

General Operation
VTM Series Installation and Operation Handbook
3-6
Navigating the Pane Setup menu
NOTE: A function button can be pressed to exit from the menu. If a different function than the
displayed function is pressed, the display will change to the newly selected function.
Use the NAVIGATION buttons or the SETUP POSITION knobs to navigate the Pane
menu. The SETUP POSITION knobs and Navigation buttons are described below:
Press to exit the menu.
Press to exit the pane menu.
Press to select a menu item or open a menu or submenu.
Press to move up in the menu or submenu.
Press to move right to the next submenu.
Press to move out of the submenu.
Press to move down in the menu or submenu.
- Rotate the knob to move the menu cursor up and down or to change a
value or condition in a menu.
- Press the knob to exit the menu.
- Rotate the knob to enter or exit the submenus.
- Press the knob to select a menu item or move to the submenu.