Specifications

General Operation
VTM Series Installation and Operation Handbook
3-2
Figure 3-2. Sample Multi-Display
Types of Controls
The VTM Series is controlled in three ways:
• Quick Controls: controls on the front panel that adjust the parameters that are
frequently used.
• Pane Menu Settings: Pop-up menus within a pane that are used to control the
parameters for the individual pane.
• Global Setup Menu Settings: Setup menu parameters that affect the entire unit
(not pane specific). The Setup menu is accessed by pressing the SETUP button.
Front Panel Illumination
The front panel controls are illustrated in Figure 3-1. Most buttons and text are in a
low tally (low illumination) state, but some buttons and text reach a high-tally (high
illumination) state under certain conditions, as described in Table 3-1. If an option is
not installed, the associated button illumination is OFF. The high and low tally
illumination level can be set in the SYSTEM\CONTROL ILLUMINATION menu.
NOTE: Multiple buttons may be high tally for a pane at the same time. The last control selected that
uses the curved arrow knob in the pane is the active control for that pane.