Specifications

VTM Series Installation and Operation Handbook
3-1
Section 3 ♦ General Operation
Terms
Pane: One quadrant in a multi-quadrant screen (Quad or Multi).
Display: The output that appears on the DVI/XGA monitor.
Quad: Screen that contains four panes.
Full: Full-screen display of the selected pane (non quad or multi display).
Multi: Contains preconfigured screens (for VTM Classic, Data Analyzer, Custom
Timing, and Waveform-Vector screens only).
Introduction to Operating the VTM Series
The VTM Series, shown and described in Figure 3-1, can contain up to four selectable
panes on the screen, in standard quad mode each of which provides a user-selectable
customized display of waveform, vector, gamut, audio, picture, relative timing, alarm
status, or data analyzer functions. A sample quad screen with the lower-right pane
selected is shown in Figure 3-2.
Certain buttons function differently according to the selected pane. Once the pane and
function for the pane is determined, more detailed settings can be configured. This
section focuses on the operation of the VTM Series according to the selected display.
Figure 3-1. VTM Series Front Panel*
*NOTE: Pressing and holding certain buttons will activate menus for additional functionality.
NOTE: In the inputs groups, press the A and B or C and D buttons at the same time to display inputs
A-B or C-D simultaneously if they are the same format.