Specifications

Specifications
VTM Series Installation and Operation Handbook
A-4
Control (continued)
Alarm Output
Relay closure
Maximum relay current
350 mA @ 30 VDC
External router control
One RJ-11 female, for use with Videotek RS-12 series routers
Remote
One RJ-11 female for use with the RCU-100
Peripheral interface
USB 1.1 supporting storage devices, mouse, and keyboard
Connector
USB 1.1, Type A, female
Display
General
A quadrant display for viewing an input on up to four different displays
as picture, waveform, vector, audio, alarm status, timing, optional eye
pattern, simultaneously or individually as a full screen display of each
separately. Additional data analyzer display for pixel analysis. Also,
view multiple waveform and vectors of the same or different inputs.
Waveform
Composite. YC
B
C
R
or RGB, parade/overlay of like formats
Sweep time base
 1H or 2H with x1, x5, and x10 horizontal magnification
 1V or 2V with x1, x5, and x25 horizontal magnification
Waveform accuracy
≤ 1%
Eye (optional)
Display Eye or waveform individually or paraded
Sweep time base
Overlay or 10 Eye (SD), 20 Eye (HD)
Filters
10, 100 Hz, 1 kHz
Vector
R-Y vs. B-Y for Analog CB vs. CR for HD or SD
Vector Accuracy
≤ 1°
Gamut
Encoded or RGB gamut displays with upper and lower limit selection
Audio (Optional)
2, 4, 6, or 8 channels displayed simultaneously