Specifications

Global Setup Menu Functions
VTM Series Installation and Operation Handbook
4-47
18. Use the RIGHT NAVIGATION button to move the cursor to select ACCEPT.
19. Press the ENT button. The new password has been set.
Set Time
When selecting Set Time, the Enter New Time Screen, shown in Figure 4-6, appears.
The Enter New Time screen is used to set the internal clock of the unit. Press the UP
and DOWN NAVIGATION button to change the values of each time selection. Press
the RIGHT and LEFT NAVIGATION buttons to move between the Hour, Minute,
Second, Month, Day, Year, ACCEPT, and CANCEL selections. Once the internal date
and time is entered, press ENT when the accept button is highlighted to save the
settings.
Figure 4-6. Enter New Time Screen
Time Code Input
The Time Code Input is used to determine the Time Code for each format. The VTM
Series can read LTC (Longitudinal Time Code) and DVITC (Digital Vertical Interval
Time Code) based on the format selected. The Time Code Input menu has three
submenus:
• ANALOG: reads LTC and VITC
• SD: reads LTC and DVITC
• HD: reads LTC, ANC LTC, and ANC DVITC
DVITC for HD/SD and VITC for NTSC and PAL are monitored on selected lines.
• After DVITC is selected, adjust the line selection in the DVITC LINE 525 or
DVITC LINE 625 submenus to the selected line. The range for DVITC LINE 525
is adjustable from Line 10 to 20, and DVITC LINE 625 is adjustable from line 6
TO 22.
• After VITC is selected, adjust the line selection in the VITC LINE NTSC or VITC
LINE PAL submenus to the selected line. The range for VITC LINE NTSC is
adjustable from Line 10 to 20, and VITC PAL is adjustable from line 6 TO 22.
For more information on displaying Time code see Time Code on page 4-37.
Aural Alert
Aural Alert is used to enable and disable the audible tone that originates from inside
the VTM Series. The Aural alert sounds when a minimum or maximum menu control
value is reached. The default Aural Alert setting is ON.