Specifications
Global Setup Menu Functions
VTM Series Installation and Operation Handbook
4-45
2. Use the NAVIGATION buttons to move the cursor to the SYSTEM menu.
3. Press the ENT button.
4. Use the NAVIGATION buttons to move the cursor to PANEL LOCKOUT.
5. Press the ENT button. The Enter Password screen appears.
6. Use the UP and DOWN NAVIGATION buttons to select 0-9 (first digit in
password).
7. Use the RIGHT NAVIGATION button to move the cursor to select the second
password number.
8. Use the UP and DOWN NAVIGATION buttons to select 0-9 (second digit in
password).
9. Use the RIGHT NAVIGATION buttons to move the cursor to the third password
number.
10. Use the UP and DOWN NAVIGATION buttons to select 0-9 (third digit in
password). When the password is correctly entered, LOCKED will change to
UNLOCK.
11. Use the RIGHT and LEFT NAVIGATION buttons to move the cursor to select
UNLOCK.
12. Press the ENT button.
13. Use the UP and DOWN NAVIGATION buttons to move the cursor to select the
Preset Number or front panel.
14. Press the ENT button to toggle between Lock and Unlock on the highlighted Preset
Number selection.
15. Repeat the previous two steps for any other selection needed to be made.
16. After the settings are complete, press the EXIT button to exit the menu.
(If the front panel was locked in the steps above) The front panel is locked once EXIT
is pressed. Any button pressed besides the SETUP button will invoke the PANEL
LOCKED OUT message. Subsequent presses of the SETUP button will invoke the
ENTER PASSWORD setup screen. The panel will be unlocked and the Setup menu
can only be accessed after a valid password has been entered.
To unlock the locked front panel:
NOTE: The default password is 0-0-0.
1. Press the SETUP button until the Enter Password Screen appears.
2. Use the UP and DOWN NAVIGATION buttons to select 0-9 (first digit in
password).
3. Use the RIGHT NAVIGATION button to move the cursor to the second password
number.
4. Use the UP and DOWN NAVIGATION buttons to select 0-9 (second digit in
password).