Specifications

Global Setup Menu Functions
VTM Series Installation and Operation Handbook
4-35
Persistence
Persistence is used to determine how long a data point (pixel) in the Gamut remains on
the display. The ranges of Persistence are NORMAL, 1 TO 6, & INFINITE.
Color Plot
The Color Plot is used to set the color for plotting RGB pixels. The pixels can be one
single color or individual colors (Red, Green, or Blue). Multiple colors help to indicate
which color of the RGB signal moves beyond the inner and outer parameters of the
gamut graticule. Select RGB for multiple colors.
Data Error Persistence
Data Error Persistence is used to determine how long a point of data in the Composite
Gamut remains on the display. The ranges of Persistence are NORMAL, 1 TO 6, and
INFINITE.
Error Highlighting
Error highlighting changes color of the portion of the Composite Gamut that exceeds
the digital gamut alarm settings. OFF is the default.
Picture Setup Menu
The Picture Setup menu items are described below.
Thumbnail
A thumbnail is approximately 1/16 of the full screen display or 1/16 of the pane. It is
used to show the picture that is being measured in the pane or display. Up to four
thumbnails can be shown simultaneously. Each thumbnail can be for the same or
different input. When in quad mode (not full screen), the thumbnail will not be
displayed if one of the four panes has picture selected.
The thumbnail picture is shown in one corner of each Upper Left, Upper Right, Lower
Left, and Lower Right pane by using the THUMBNAIL menu. A sample quad-screen
display containing a thumbnail in the lower-right corner of the lower right pane is
shown in Figure 4-2.