Specifications

General Operation
VTM Series Installation and Operation Handbook
3-85
Data Search
The Data Search menu is used to select the data ID of the ancillary data that will be
highlighted when Data Search mode is enabled in the Navigation Mode menu. The
Data Search selections are:
200 Undefined format
180 Marked packets for deletion
260 Ancillary Time code
284 Data End Marker Packet
288 Data Start Marker Packet
1E3 299M, HDTV, control, Group 1
2E2 299M, HDTV, control, Group 2
2E1 299M, HDTV, control, Group 3
1E0 299M, HDTV, control, Group 4
2E7 299M, HDTV, audio, Group 1
1E6 299M, HDTV, audio, Group 2
1E5 299M, HDTV, audio, Group 3
2E4 299M, HDTV, audio, Group 4
2FF AES audio data, Group 1
1FD AES audio data, Group 2
1FB AES audio data, Group 3
2F9 AES audio data, Group 4
1EF AES control packet, Group 1
2EE AES control packet, Group 2
2ED AES control packet, Group 3
1EC AES control packet, Group 4
1FE AES extended packet, Group 1
2FC AES extended packet, Group 2
2FA AES extended packet, Group 3
FF8 AES extended packet, Group 4
2F0 METADATA packets
1F4 Error detection (EDH)
2F5 Time code
161/101 Closed Caption (EIA-708-B)
161/102 Closed caption (EIA-608 data)
162/101 Program Description DTV
162/102 Data Broadcast (DTV)
162/203 VBI Data
Custom
Custom Data Search
The Custom Data search is used to select a specific Data ID of the ancillary data that
may not be listed in the data search menu. The value is in hexadecimal form.
Timing Custom Display
Selecting the Timing Custom Display creates a fixed three-pane display with the
Timing Display filling the top two horizontal panes. The Timing pane status
information appears in the lower-left section of the pane.
The Vector or Gamut display is the lower-left pane. The waveform display is the
lower-right display. These displays cannot be moved. Selecting the pane and then
pressing and holding the WFM, VEC, GAMUT, or TIMING function buttons open the
associated pane menu.
A sample illustration of the Timing Custom Display is shown in Figure 3-57.