Specifications

General Operation
VTM Series Installation and Operation Handbook
3-82
Figure 3-56. Data Mode Display
Table 3-48. Description of Data Mode Display
Key Indicator Description
1
LINE Indicator that shows the line number of the picture along with the Even (E)
and/or Odd (O) line selection. The line number corresponds to the cursor on
the picture.
2
SAMPLE Indicates the selected pixel samples inside the pixel cursor.
3
PIXEL Complete information for two Pixels.
4
ELEMENTS Elements that show the component samples for each pixel. There are two
elements per pixel sample grouping: CB, Y and CR, Y
l
.
5
DATA Value of CB, Y, CR, and Y
l
in Decimal, Hex, or Binary form.
6
CURSOR Cursor for the Data Zoom Display. Represents the exact location of the
cursor in the Picture Display. The cursor area indicates the pixels that are
represented in the Pixel, Element, and Data columns.
7
PICTURE ZOOM Zoomed portion of the picture display to show the precise pixel locations.
Pixel Cursor
When selecting Data Analyzer, the pixel cursor appears on the picture display. The
Pixel cursor in the picture display shows the general location of the data displayed in
the Data Zoom pane. Look at the Picture Zoom display for the precise location of the
Data display cursor. Rotate the HORIZONTAL LEFT/RIGHT knob to move the pixel
cursor horizontally (left and right). Also, when the LINE button is enabled (the LINE
button is high tally), turn the CURVED ARROW knob to move the pixel cursor
vertically (up and down), and to change the line. As the cursor is adjusted, the data in
the data display changes.