Specifications
General Operation
VTM Series Installation and Operation Handbook
3-65
Table 3-39. Option Pane Menu
DOLBY METADATA (only if the Dolby
option is installed).
VIDEO METADATA
XDS
TELETEXT
CRC
ASI
DISPLAY
EMBEDDED AUDIO DATA
SETUP
Press ENT
Display
The display that appears for the selected input is determined by the DISPLAY
submenu of the OPTION Pane setup menu. The displays that are selectable are:
• Dolby Metadata (described on page 3-65)
• Video Metadata (described on page 3-67)
• XDS (described on page 3-69)
• Teletext (described on page 3-70)
• CRC (described on page 3-71)
• ASI (described on page 3-73)
• Embedded Audio Data (described on page 3-77)
Option Setup
Press the ENT button to access the global setup menu. For more information on the
global Setup menu see Section 4.
Dolby Metadata Display (Option Dependent)
Metadata is Dolby specific information found in the input audio stream that is used to
configure encoders that will transmit the Dolby Digital (AC-3) information to audio
decoders.
When the metadata information appears on the display, use the UP and
DOWN NAVIGATION buttons to page through the metadata list. Press
the RIGHT NAVIGATION button to move to the next program list.
Press the LEFT NAVIGATION button to move to the previous program
list. The metadata is read from the Dolby stream and cannot be
changed.