Specifications

Operation
VTM-200 Installation and Operation Handbook 3-17
Navigating the SETUP MENU
Press SETUP/LEARN to display or exit the SETUP MENU. Use the following knobs
to navigate and select values on the SETUP MENU:
• WAVEFORM POSITION-H
− Rotate the knob left or right to move the menu cursor or to change a value or
condition in a menu.
− Stop knob at desired item.
• WAVEFORM POSITION-V
− Rotate the knob to change a selected value or move a graticule cursor line.
− Stop knob at the desired value.
Enter the Setup mode to display the SETUP MENU.