User guide

ManualsBrandsVideotec ManualsCamcordersULISSE COMPACT

Instructions manual - English - EN

27MNVCUCZ_1351_EN

9 Conﬁguration

The product can be congured through the OSM

interface (text on analogue video signal), web

interface (through a browser) and VMS VIDEOTEC

software (installed on a PC).

9.1 OSM interface

9.1.1 On screen menu (OSM)

During the normal operation of the unit it is possible

to activate the On Screen Menu in order to set the

advanced functions using the corresponding keys.

For further information, refer to the manual of the

keyboard in use. For further information refer to the

relative chapter (11.13 Special controls, page58).

Exit the On Screen Menu with Zoom Wide (or Zoom-).

This is a dynamic self-conguration menu

based on the Pan & Tilt model.

9.1.1.1 How to use the joystick

All operations in the menus are carried out using the

joystick.

Down

Left Right

Fig. 36

Exit Conrm

Fig. 37

If using a control keyboard with a dual axis

joystick, use the Zoom Wide and Zoom

Tele keys to carry out the Exit and Conrm

commands.

9.1.2 How to move around the menus

Each page of the OSM shows a list of parameters or

sub-menus that can be selected by the operator. To

scroll through the parameters move the cursor by

operating the joystick (up and down).

ADVANCED

------------------------

1 ZOOM SPEED : 7

2>DIGITAL ZOOM : N

3 WIDE DYNAMIC : Y

4 HIGH RESOLUTION: N

5 BACKLIGHT COMP.: Y

6 FOCUS >

7 EXPOSURE >

8 INFRARED >

9 WHITE BALANCE >

Fig. 38

The symbol > at the end of a line indicates the

presence of a specic submenu. To enter the

submenu just conrm the menu item. To exit the

submenu use the Exit function (Zoom Wide).