Instruction Manual
Instructions manual - English - EN
13
7.4.3 Default values
If it is necessary to restore the camera's default
conguration (factory settings), click on the Setup
key and then press Factory Defaults and Save
Settings…
Fig. 19
For the full description of all the advanced options of
the Camera Controller GUI software, refer to the FLIR
Camera Controller GUI User’s Guide.
8 Maintaining and cleaning
8.1 Maintaining
8.1.1 Replacement of the germanium
glass
Unscrew the xing screws of the front ange using
the supplied Allen wrench. Remove the ange and
position the spare part, making sure the gasket
remains in place. Tighten the 4 xing screws.
Fig. 20
8.1.2 Fuses replacement
Use a fuse with the following features:
T 500mA L 250V