Instruction Manual

Instructions manual - English - EN
57
9.7 IP Board Conguration
9.7.1 Minimum system requirements
Choose one of the following congurations,
according to the number of channels to be
controlled.
CHANNELS CPU MEM HDD
16 Intel Core 2
Duo 2.4 GHz
1GB 250GB
32 Intel Core 2
Duo 2.66 GHz
2GB 250GB
49 Intel Core 2
Quad 2.66
GHz
4GB 250GB
64 Intel Core 2
Quad 2.66
GHz
4GB 250GB
Tab. 10
9.7.2 Conguration procedure
Once the pan & tilt has been preset and congured,
start conguring the IP parameters (6.1.8 Connection
of the ethernet cable, page22).
The IP address of the various units should be
congured using a PC with a Microsoft Windows Xp®
service pack 2 or Microsoft Windows Vista® (Business
Edition or Enterprise Edition) OS and Microsoft
Internet Explorer® software.
Set the IP address of the PC as 192.168.0.1 (or
192.168.0.2 etc.).
To congure the unit, connect it physically to the
LAN, power it and run the browser Microsoft Internet
Explorer® version 6.0 or above.
To set the IP address of the various units,
power them, taking care to connect them
one at a time to the LAN (switch/hub).
Congure the unit and insert the settings
for at least the IP address and host name.
When the unit has all the desired settings,
connect the ethernet cable and go on to
congure the next unit.
Enter address 192.168.0.100. you will have to log in
with a password.
The default account name is: Admin (with a capital A).
The default password is: 123456
When making the settings for the rst time, insert the
default account name and password.
Fig. 112
When installing for the rst time, it will be necessary
to install OCX control in order to have a correct video
display and then conrm the settings in the following
pop-up menu.
Fig. 113
When you have pressed OK/Enter in the pop-up
menu, the following window will appear.
Fig. 114