Instruction Manual

Instructions manual - English - EN
33
9.3 How to change the settings
Move the cursor to the parameter to be changed and
conrm. The eld will start ashing, indicating that
it is in change mode. Operating the joystick (up and
down) will show the alternative choices.
ADVANCED
------------------------
1 ZOOM SPEED : 7
2>DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 55
After identifying the desired selection, conrm.
ADVANCED
------------------------
1 ZOOM SPEED : 7
2>DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 56
The parameter will stop ashing to conrm the
choice.
9.4 How to change the numeric
elds
Move the cursor to the parameter to be changed and
conrm.
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+ 0.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
Fig. 57
The rst digit in the numeric eld to be changed will
ash and the last line of the display will show the
accepted limits for the eld. Move in the eld (left
and right) and change the sign or the numeric value
(up and down).
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+000.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
min:-180.00 max:+179.99
Fig. 58
After making the change, conrm. The cursor returns
to the left and the modied gure stops ashing.
The eld will be forced to the minimum or maximum
allowed value if you try to insert a value outside the
limits.